Sponsored

Systematic Construction - Up to 95% Prefabricated

Modular construction begins long before assembly: Leipfinger-Bader’s brick modules enable multi-story construction with up to 95% prefabrication in the factory, without compromising on quality or aesthetics.

Systematic Construction - Up to 95% Prefabricated
© mju-fotografie, Marie Luisa Jünger, Hümpfershausen; Architektur: Brückner & Brückner Architekten, Tirschenreuth | Würzburg

Modular construction begins long before assembly: during the planning phase, in the coordination of components, and in determining which elements can be effectively prefabricated in the factory. Leipfinger-Bader brick modules create more space in less time—without compromising on quality, aesthetics, or efficiency. Through the clever combination and flexible arrangement of the modules, attractive multi-story construction can be realized economically, quickly, and in a future-proof manner. The degree of prefabrication and the specifications are individually tailored to the specific project and design—up to 95% prefabrication in the factory is possible. Even individual prefabricated components can open up new design possibilities: In the new building for the Association for Rural Development (VLE) by Brückner and Brückner Architects, ceiling modules are part of the structure. In the “House Almost Without Heating” by nbundm Architects, the interplay of structure, materials, use, and energy allowed for the elimination of heating systems.

Clay, Brick, and Wood as a Structural Solution

In the new building for the Association for Rural Development, the focus is on the interplay of natural materials. Clay, brick, and wood are not only used as visible materials but are also integral to the structure itself. Leipfinger-Bader contributed to the project with, among other things, a modular, prefabricated solid wood-clay floor slab, which was used over approximately 650 m² as both a floor slab and a roof. This is complemented by the recycled “Kaltziegel” brick, the screed brick as an alternative to traditional screed, and a clay panel. In this way, different solutions interlock: wood and clay characterize the floor construction, the “Kaltziegel” represents circular construction, while screed bricks and clay panels carry the interior finish forward. The project demonstrates how materials can be combined not only individually but also as coordinated building components to form a cohesive building concept.

Less Technology Through a Better Understanding of Buildings

The “House with Almost No Heating” in Ingolstadt demonstrates a different approach. The residential building, which contains 15 apartments and 1,276 m² of living space, was designed as a pilot project for Building Type E based on the 22–26 principle. Solid brick construction, a wood facade, a green roof with a photovoltaic system, and a deliberately simplified heating concept all work together here. The goal is to regulate the room temperature primarily through the building’s structure, thermal mass, internal heat sources, and an automated ventilation control system.

Leipfinger-Bader solutions are also part of this concept: Silvacor bricks filled with wood fibers were used in the masonry. For cold days, the electric floor heating system was supplemented with screed bricks and heating paper; the heat is activated only as needed.

Buildings, Location, and Use as a System

Neither project follows a one-size-fits-all formula. Rather, they demonstrate that sustainable and resource-efficient architecture must be developed based on the specific requirements of the location and its intended use. Materials, building components, and technical systems are most effective when they are not planned in isolation but are coordinated with one another.

Architecture
nbundm Architekten, Brückner & Brückner
Location
Ingolstadt (DE)

  • Patio Housing in Riga

    How people choose to live is demonstrated by which housing types sell well. For the conversion of a commercial courtyard facility in Riga, the planning office and the investor dared to question common market assumptions.

  • Kitchen units, washbasins, and lighting fixtures were reused. They were sourced from other properties of the university complex or from buildings beyond the campus.

    Circular model of renovation

    Former Student Dormitory in Brussels

    What kind of future awaits the buildings of the 1970s that have not yet been listed for historic preservation? With their circular design concept, Maker Architecten demonstrate how suitable this type of architecture is for reinventing and rejuvenating it today.

  • Multi-purpose Hall Ingerkingen near Biberach

    A semblance of broken porcelain with its repaired parts remaining visible forever: With their multi-purpose hall, Atelier Kaiser Shen demonstrate how construction in an existing context can be represented within the image of the building, despite comprehensive modernisation.

  • The expansion responds to the grey concrete surfaces of the three neighbouring school buildings by displaying strong colourful accents.

    New shell, same core

    School Expansion in Davos

    Using resources sparingly is not only expressed by exteriors. The school building by Cura Architekten appears new, yet the existing building fabric was comprehensively maintained beneath the new envelope.

  • Inclusive Centre near Barcelona

    An old textile factory was transformed into a day centre for individuals with disabilities. As a public building in the heart of the city, it represents a completely new understanding of inclusion.

  • Paul Van Ostaijen Culture Campus in Leuven

    Lava architecten transformed an old mission building in Leuven into a place where circus arts, music, theatre, and dance coexist under one shared roof. Effective soundproofing is the precondition for the shared use of the facility.